Plastic Tubing

Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.

How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.

Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation

1,156 – 1,170 of 3,182 results

1,156

Perkin Elmer US LLC CT-Flex Corrugated Teflon FEP Tubing - 0.25 in OD

CT-Flex Corrugated Teflon FEP Tubing shapes and flexes easily and can take tortuous paths. It features a practically zero-bend radius and can be extended or compressed without affecting the inner diameter. CT-Flex resists chemicals, elevated temperatures, cut-through, and strain. CT-Flex is made from Teflon FEP, has read-thru transparency and has FDA approval under regulation 21 CFR 17.1650. The non-wetting surface of CT-Flex means easy clean-out, so batch-to-batch contamination is not a problem. Teflon FEP contains no plasticizers or filler to leach out and contaminate the product stream. Other features include: Vacuum Service: 29.9 in Hg. Extension/Compression Length Ratio: 2:1 Max Continuous Service Temperature: 200°F (0 pressure)

Pricing & Availability

1,157

Accuflow Systems TUBING VINYL 5/16 x 1/16 50FT/PK

TUBING VINYL 5/16X1/16 50FT/PK

Pricing & Availability

1,158

Accuflow Systems Saint-Gobain FEP Tubing, 1/16 x 1/8 In, 50 Ft

Flexible, high-purity FEP tubing with thin-wall construction for low dead volume and excellent chemical resistance. Clear tubing suitable for laboratory, analytical, and semiconductor fluid handling. Supplied in 50 ft lengths.

Material: FEP fluoropolymer.
Inner diameter: 1/16 in (0.0625 in).
Outer diameter: 1/8 in (0.125 in).
Wall thickness: 0.031 in.
Package length: 50 ft per pack.
Appearance: clear.
Operating temperature range: -400 °F to 400 °F (-240 °C to 205 °C).
Typical applications: chemical transfer, laboratory fluid handling, semiconductor processing.

Pricing & Availability

1,159

Accuflow Systems Saint-Gobain FEP Tubing, 5/32 ID x 1/4 OD, 50 ft

FEP tubing with 5/32 in inner diameter and 1/4 in outer diameter, 0.047 in wall thickness, supplied in a 50 ft coil. The tubing offers broad chemical compatibility and a wide operating temperature range suitable for laboratory, pharmaceutical, bioprocessing, and semiconductor fluid-transfer applications.

FEP fluoropolymer construction provides chemical inertness and low extractables.
5/32 in inner diameter, 1/4 in outer diameter, 0.047 in wall thickness.
Supplied as a 50 ft length coil for continuous runs or dispensing.
Wide temperature range: -328°F to 402°F (-200°C to 206°C).
Resistant to most solvents, acids, and fuels.
UV resistant for extended outdoor or light-exposed use.

Pricing & Availability

1,160

Accuflow Systems TUBING VINYL 3/8 x 1/8 50FT/PK

Saint Gobain Clear PVC Tubing Diameter Inner 3/8 in. 9.5 mm Diameter Outer 5/8 in. 15.9 mm Thickness 3.2 mm 0.125 in. Overall Length 50 ft. 15.2 m

Pricing & Availability

1,161

Chemglass Life Sciences FEP Tubing; 3/4" OD x 5/8" ID x 20ft Long

FEP Tubing; 3/4" OD x 5/8" ID x 20ft Long. EP heavy wall tubing for use with Chemglass process reactors. Used to connect components having 1/4", 1/2", or 3/4"OD glass connections.